Setting Up The Switch - Monoprice Blackbird 15373 User Manual

SETTING UP THE SWITCH

1. Press and hold the RESET button on the rear panel of the
switch for about 5 seconds. The LEDs will all illuminate,
indicating that the switch is in "network settings" mode.
2. Open the Wi-Fi® settings on your computer or mobile
device. Search for nearby networks, then locate and
select the B31-XXXX network.
3. Open your web browser and navigate to 192.168.4.1 or
smart.com. The HDMI SMART page will load, as shown
below.
18