Sony DSR-45/45P Operating Instructions Manual page 55

Connection of a video monitor
Set up the following connections to enable monitoring
of video and audio signals on a video monitor. In
addition to video signals, you can check time data, the
DSR-45/45P's operation mode, alarm messages, and
other information displayed as text on the monitor
screen.
75 Ω termination switch: ON
(or attach a 75 Ω terminator)
Input switches: Set
according to the type of input
signals.
Note
When you want to monitor the edited tape, use the
monitor output connector on the recording VCR.
Video monitor
Video input Audio input
Phono jack cable (not supplied)
DSR-45/45P
MONITOR
AUDIO
Chapter 3 Using the Unit as a Player in an Editing System
MONITOR
VIDEO
55
(GB)