Sony DSR-45/45P Operating Instructions Manual page 34

Playback
To video equipment without a DV jack
You can connect this unit to video equipment without
a DV jack. Use this unit as follows.
The following illustration shows an example of a
Monitor
Reference video
signal generator
B.B.OUT
75 Ω coaxial cable
(not supplied)
REF.VIDEO
Recorder
Component input
Audio input
Time code input
Connect one of the following as a video cable: video
cable (3BNC y 3BNC), S-video cable, 75 Ω coaxial
cable.
34
(GB) Chapter 2 Playback and Recording
Audio input
B.B.OUT
Monitor
S-video input
S-video cable (not supplied)
75 Ω coaxial cable (not supplied)
Video cable (3BNC y 3BNC) (not supplied)
Audio cable (XLR y XLR) (not supplied)
75 Ω coaxial cable (not supplied)
Video input
configuration for dubbing a tape with its time code in
the externally-synchronized playback mode. In this
configuration, the recorder is a VCR equipped with
XLR input connectors.
Phono jack cable (not supplied)
Phono jack cable (not supplied)
DSR-45/45P (player)
(rear panel)
Video input
: Signal flow