Sony DSR-45/45P Operating Instructions Manual page 63

DSR-45/45P time codes
This unit has a DV jack. The time code output and
recorded on the tape differs as shown below when the
INPUT SELECT selector is set to DV and when it is set
to other than DV.
When DV IN TC is set to INTERNAL
INPUT SELECT
TC/UB IN
menu
Playback
INTERNAL
COMPONENT
EE
TC&UB EXT
TC EXT
UB EXT
COMPONENT
When DV IN TC is set to EXTERNAL and the INPUT SELECT selector is set to DV
a) This includes stop, fast-forward or rewind. If the unit
cannot read the time code on the tape correctly, the
counter displays "– –:– –:– –:– –" and the time code is
not output from the TC OUT connector.
b) "DUB1", "DUP1" and "REC1" represent the state of the
unit when you press each of these buttons (AUDIO DUB,
DUP or REC) in the stop mode. If the counter displays
"– –:– –:– –:– –", the time code is not output from the TC
OUT connector when you press the AUDIO DUB button
in the stop mode.
Mode
selector
Playback
Audio dubbing
Playback at various
a)
speeds
b)
DUB1
Duplicate
DUP1 b)
DV
Recording
Recording Pause
REC1 b)
S VIDEO
Recording
VIDEO
Recording Pause
b)
REC1
(Except DV)
Duplicate
b)
DUP1
DV
Recording
Recording Pause
REC1 b)
S VIDEO
Recording
VIDEO
Recording Pause
REC1 b)
(Except DV)
Duplicate
DUP1
EE
Recording
Recording Pause
REC1
The time code output from the
TC IN
TC OUT connector and the time code/
Time code/user bits on the tape
JOG TC OUT: ON – Time code/user bits on
JOG TC OUT: OFF – Mute (No output)
Time code/user bits of another device
connected to the DV jack
Time code/user bits internally generated
Time code/user bits internally generated
Time code/user bits of another device
connected to the DV jack
Time code/user bits internally generated
Time code/user bits connected to TC IN are
Yes
through-output.
No output from the TC OUT connector (For
details, see next page.) : the time code
No
generated internally is recorded on the tape
The time code output from the TC OUT connector
Mode
and the time code/user bits recorded on the tape
Time code/user bits of another device connected to
b)
the DV jack c)
Time code input of another device connected to the
DV jack and user bits internally generated
b)
c) The time code is also displayed on the time counter
display in the display window.
d) When TC/UB IN is set to TC EXT, the user bits set in
UB PRESET are recorded. When TC/UB IN is set to UB
EXT or TC&UB EXT, "00 00 00 00" is recorded as the
user bits.
e) Only when REC MODE on the VTR SET menu is set to
DVCAM. When REC MODE is set to DV SP, the
internally generated time code is output.
Chapter 4 Setting the Time Code and Adjusting the Video Signals
user bits recorded on the tape
the tape;
c)
c)
e)
c)
c)
c)
d) .
63
(GB)