Infortrend EonStor GSa 5000 Series Hardware Manual page 30

b. If your system is GSa 5200, install the host boards in slots 1 until 8.
NOTES:
•
•
•
6. Install back the controller to the system (A). When you feel a contact resistance, use a small but
careful force, then push the ejection handles back in place (B).
2-8
GSa 5100 supports up to 4 host boards (2 per controller).
GSa 5200 supports up to 16 host boards (8 per controller).
See section Installing the memory for more details on host board-supported memory.
Chapter 2: Hardware installation