Table of Contents
Advertisement
Maintenance
Daily System
System Care
Care
Daily
Daily
System
Care
1. Follow the
Pressure Relief Procedure, page
2. Clean the fluid and air filters.
3. Check for fluid leaks. Tighten all fittings.
4. Clean workpiece hangers. Use non-sparking
tools.
5. Check the movement of the trigger and valves.
Lubricate if necessary.
6.
Check Gun Electrical Grounding, page
7. Hang the gun from its hook, with the nozzle
pointing down. Be sure to keep the gun from
grounding out.
46
39.
8. Clean the cabinet:
• Inspect the cabinet and clean up any spilled
paint. Conductive paint residue allowed to
contact grounded parts may short out the
electrostatics.
• Keep the inside of the cabinet clean, for proper
operation.
• Inspect the door T-handle locking screw
regularly, to ensure the threads are well
greased. Apply silicone-free grease to the
threads when necessary.
• Visually inspect the ground strip (240)
for damage. Replace if needed.
Measure the resistance weekly. See
Test Ground Strip Resistance, page
38.
50.
3A2496H
Advertisement
Table of Contents
