Handling And Operation; Switching The Device On/Off; Adjusting The Volume; Radio Operation - Silvercrest SRH 5 A1 Operating Instructions And Safety Instructions

Handling and operation

Switching the device on/off
NOTE
► The DAB+ station list is automatically created or updated the first time
the device is switched on from standby mode using the
display
quality of the DAB+ radio reception, this process can take up to several
minutes.
► When switching on the device from standby mode with the
the device is in the last selected mode (DAB+, FM, Bluetooth
♦ Briefly press the
automatically in DAB+ mode the first time it is switched on.
Briefly press the SOURCE /
♦
radio, Bluetooth
♦ Press the
mode.

Adjusting the volume

Turn the VOLUME |
♦
the volume.
Turn the VOLUME |
♦
the volume.
NOTE
► The display
the VOLUME |
► When the maximum volume is reached, you will hear a short beep.

Radio operation

You can use the radio to receive DAB+ and FM radio stations. You can store up
to 20 preset DAB+ and 20 preset FM radio stations each.
NOTE
► The first time the device is started, it starts in DAB+ mode and the station list
of the available DAB+ radio stations is created automatically.
The display
■ 10 │ GB │ IE │ NI
1
now shows the message Scanning... DAB. Depending on the
2
button
®
or AUX IN mode.
2
button again to switch off the device and put it into standby
ENTER / SCAN dial
ENTER / SCAN dial
1
shows the volume for a few seconds as a bar after turning
ENTER / SCAN dial
1
now shows the message Scanning... DAB.
to switch on the device. The device starts
3
button to switch between DAB+, FM
6
6
6
.
2
button . The
2
button ,
®
or AUX IN).
clockwise to increase
anticlockwise to reduce
SRH 5 A1