Handling And Operation; Switching The Device On/Off; Adjusting The Volume; Settings Menu - Silvercrest SBDB 5 A1 Operating Instructions And Safety Instructions

Handling and operation

Switching the device on/off

NOTE
► The DAB+ station list is automatically created or updated the first time
the device is switched on from standby mode using the
display
of found DAB+ radio stations . During the initial start­up, this process can
take up to several minutes, depending on the quality of the DAB+ radio
reception .
► When switching on the device from standby mode with the
device is in the last selected mode (DAB+, FM, Bluetooth
♦ Briefly press the
automatically in DAB+ mode the first time it is switched on .
♦ Briefly press the SOURCE /
radio, Bluetooth
♦ Press the
mode .

Adjusting the volume

♦ Turn the VOLUME dial
♦ Turn the VOLUME dial
NOTE
► The display
the VOLUME dial
► When the maximum volume is reached, you will hear a short beep .

Settings menu

NOTE
► The settings menu can be called up during operation as well as in standby
mode .
► If no setting is made in the setup menu for more than 7 seconds, the setup
menu is exited .
♦ Press the INFO / MENU button
standby to open the settings menu .
■ 48 │ GB │ MT
now shows the message Scanning... DAB and the number
1
button
2
or AUX mode .
®
button again to switch off the device and put it into standby
2
clockwise to increase the volume .
5
anticlockwise to decrease the volume .
5
shows the volume for a few seconds as a bar after turning
1
.
5
to switch on the device . The device starts
button to switch between DAB+, FM
4
for about 2 seconds during operation or
0
button . The
2
button , the
2
® or AUX) .
SBDB 5 A1