Cleaning; Cleaning The Housing; Storage When Not In Use - Silvercrest SRH 5 A1 Operating Instructions And Safety Instructions

Fault
No automatic
setting of time and
date.
NOTE
► If you cannot solve the problem with the solutions given above, please
contact the Service Hotline (see section Service) .

Cleaning

DANGER
Risk of fatal injury from electrocution!
► Pull out the plug of the mains adapter from the power socket before starting
to clean the device.
CAUTION
Damage to the device!
► To avoid irreparable damage to the device, ensure that no moisture can
penetrate the device during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the device.

Cleaning the housing

♦ Clean the surfaces of the device with a soft, dry cloth.
♦ Use a lightly moistened cloth and a mild detergent to remove stubborn dirt
residues.

Storage when not in use

♦ If you decide not to use the device for a long period, disconnect it from
the mains power supply and store it in a clean, dry place away from direct
sunlight.
SRH 5 A1
Possible cause
The RDS signal is not
available.
Remedy
Pull out the telescopic aerial
pletely. Try to improve reception by
moving the telescopic aerial
moving the radio to another location.
GB │ IE │ NI
0
com-
0
or by
│ 23 ■