Silvercrest SRH 5 A1 Operating Instructions And Safety Instructions page 18

NOTE
►
Unpairing devices
If you want to connect the radio to another external playback device, you must
first unpair the currently connected playback device:
Press SOURCE /
♦
Pairing flashes on the display
currently connected external playback device.
Button functions during playback via Bluetooth
VOLUME |
ENTER / SCAN
TUNE+
TUNE−
SOURCE /
NOTE
► The volume on the radio and on the external playback device can be ad-
justed independently of each other. For example, if the volume of the radio
is set to maximum and the volume of the external playback device is set to
minimum, you will hear nothing through the radio.
► It is possible that not all functions will be supported depending on the
external playback device being used and its operating system.
► In an environment with high-frequency interference, you may experience
noise interference during music playback in Bluetooth
as the interference has ceased, music playback should automatically
continue in Bluetooth
SRH 5 A1
The next time you turn on the radio, it will connect automatically to the last-
connected external playback device. If your external playback device does
not automatically reconnect to the radio, you will have to re-establish the
connection manually. You can find a detailed description of how to do this
in the operating instructions for your external playback device.
3
for about 2 seconds. You will hear a beep and
Button Function
►
6
►
8
►
►
7
►
►
3
®
mode without any further problems.
1
. Alternatively, you can unpair via the
Press briefly to start/stop playback.
Press briefly to move to the next track.
Press for approx. 2 seconds to change to fast
forward mode.
Press briefly to go to the beginning of the
current track. Press briefly again to go back to
the previous track.
Press for approx. 2 seconds to change to
rewind mode.
Press for approx. 2 seconds to unpair the
devices.
®
®
mode. As soon
GB │ IE │ NI │ 15 ■