Table of Contents
Advertisement
H
DESCRIPTION OF CONTROL PANEL
A
A
A
Legend
A = ON/OFF button
B = Softener regeneration cycle
C = Drain / self-cleaning cycle
D = Display
Described below are all the single buttons and functions available in the various control panel models listed above.
Some functions are common to all models of the range, whereas others are available only on some versions.
H1
Basic controls
ON/OFF button (A)
Press this button to activate or deactivate the appli-
ance. When the equipment is on, the button indicator
is lit up.
Softener regeneration cycle (B)
When on the display appears "", press this button
to activate the regeneration cycle of the water continu-
ous softener.
Drain / self-cleaning cycle (C)
Press this button to starts a drain/self-cleaning cycle.
When the cycle is selected, the button indicator is lit up.
"Tank temperature" indicator (E)
When the water in the tank reaches the operating tem-
perature, the indicator comes on.
B
C
D
E
R
B
C
D
E
R
B
C
D
E
R
E = "Tank temperature" indicator
F
= "Boiler temperature"
indicator
G = Wash cycle 1
Table 3 Control panel
G
H
I
F
G
H
I
F
G
H
I
F
H = Wash cycle 2
I
= Wash cycle 1 with cold rinse
"Boiler temperature" indicator (F)
When the water in the boiler reaches the operating tem-
perature, the indicator comes on.
Wash cycle 1 (G)
This button starts wash cycle 1.
When the cycle is selected, the button indicator is lit up. This
cycle is recommended for washing normally dirty dishes.
Wash cycle 2 (H)
This button starts wash cycle 2.
When the cycle is selected, the button indicator is lit up. This
cycle is recommended for washing very dirty dishes.
Wash cycle 1 with cold rinse (I)
This button starts wash cycle 1 with a cold rinse at the end of
the wash cycle. When the cycle is selected, the button indi-
cator is lit up.
17
Hide quick links:
Advertisement
Table of Contents
