Section 4 - Support Services; Introduction; Replacement Parts - ABB TB404 Operating Instruction

INTRODUCTION

REPLACEMENT PARTS

SECTION 4 - SUPPORT SERVICES

When ordering replacement parts, specify nomenclature type, part name and
part number.
ABB is ready to assist in the use and repair of its products at any time.
Requests for sales and/or application service should be made to the nearest
sales or service office.
Factory support in the use of the Type TB404 Toroidal Conductivity Sensor
can be obtained by contacting:
ABB Inc.
9716 S. Virginia St., Ste E
Reno, NV 89511 USA
Phone: +1 (775) 850 4800
Fax: +1 (775) 850 4808
www.abb.com/instrumentation
When making repairs at your facility, order spare parts from a ABB sales
office. Provide this information.
1. Spare part description, part number and quantity.
2. Model and serial number (if applicable).
3. ABB instruction manual number, page number and reference figure that
identifies the part.
Contact ABB for replacement toroidal conductivity sensors. Table
the accessories available for the sensor. This table also applies to spare and
replacement parts. When ordering standard parts from ABB, use the part
numbers and descriptions from Table 1-4. Order parts without commercial
descriptions from the nearest ABB sales office.
1-4 lists
INTRODUCTION
4 - 1