Panasonic Lumix DC-G95 Basic Owner's Manual page 81

The battery becomes flat too quickly.
• When [4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster.
Set these settings only when recording.
• When connected to Wi-Fi, the battery drains quickly.
Turn the camera off frequently such as by using [Economy].
Multiple images are recorded at once.
• When drive mode is set to [
pictures.
• When bracketing is set, then pressing the shutter button records multiple images while
automatically changing the settings.
The subject is not focused properly.
• Confirm the following details:
– Is the subject outside of the focus range?
– Is [Shutter AF] set to [OFF]?
– Is [Focus/Release Priority] set to [RELEASE]?
– Is AF Lock set where it is not appropriate?
• If there are fingerprints or dirt on the lens, the focus may be set to the lens and not the subject.
The recorded image is blurred.
The stabilizer is not effective.
• The shutter speed will become slower and the stabilizer function may not work properly when
recording in dark places.
In these cases, use a tripod and the self-timer when recording.
Striping or flicker may appear under lighting such as fluorescent lighting and
LED lighting fixture.
• This is characteristic of MOS sensors which serve as the camera's
pickup sensors.
This is not a malfunction.
• When using the electronic shutter, lowering the shutter speed may
reduce the effect of the horizontal stripes.
• If flicker or horizontal stripes are noticeable when recording motion
picture, this can be mitigated by fixing the shutter speed.
Either set [Flkr Decrease], or record in Creative Video Mode.
] (Burst), pressing and holding the shutter button will take burst
Others
81
(ENG) DVQX1749