Panasonic Lumix DC-G95 Basic Owner's Manual page 82

Others
The brightness or coloring of the recorded image is different from the actual
scene.
• When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed
may introduce slight changes to brightness or coloring.
These are a result of the characteristics of the light source and do not indicate a malfunction.
• When recording subjects in extremely bright locations or recording under fluorescent lighting,
LED lighting fixture, mercury lamp, sodium lighting, etc., the coloring or screen brightness may
change or horizontal striping may appear on the screen.
The subject appears distorted on the image.
• When a moving subject is recorded while using the following functions, the subject may appear
distorted in the picture:
– [ESHTR]
– Motion picture recording
– [4K PHOTO]
This is a characteristic of the MOS sensor that is the image sensor of the camera, and is not a
malfunction.
Cannot record motion pictures.
• When using a large capacity card, you may not be able to record for a while after turning on the
camera.
Motion picture recording stops before finishing.
• Recording motion picture using the SD card requires an SD card of a supported speed class.
Use a compatible SD card.
Sometimes focus adjustment with AF mode is difficult while recording 4K
motion pictures.
• This may occur when taking a picture by reducing the AF speed in order to adjust the focus at
high precision. This is not a malfunction.
The flash does not fire.
• Open the flash if it is closed.
• The flash does not fire when [Œ] (forced flash off) is selected.
• The flash does not fire when using the following functions:
– Motion picture recording
– [4K PHOTO]
– Post Focus
– [ESHTR]
– [Silent Mode]
– [Filter Settings]
– [HDR]
82
DVQX1749 (ENG)