Panasonic Lumix DC-G95 Basic Owner's Manual page 64

Menu Guide
2
Select frames to combine.
Select the frames so that the moving subject will not overlap on the preceding or subsequent
frames. (The sequence composition may not be created properly if the subject overlaps.)
1 Drag the slide bar or use
frames to combine.
2 Press [MENU/SET].
• The selected frames are remembered, and the display
goes to the preview screen.
• Press 3/4 to select items and press [MENU/SET] to
perform the following operations.
– [Next]:
Lets you select more frames for combining.
– [Reselect]:
Discards the frame selected immediately before and lets you select a different image.
3 Repeat steps
• You can select 3 to 40 frames.
4 Press /
3 4
¥ Pictures are saved in JPEG format. Recording information (Exif information) of the first frame
such as shutter speed, aperture, and ISO sensitivity are also registered.
Tips for [Sequence Composition]
We recommend using a tripod to take pictures for [Sequence Composition].
[Video Divide]
Recorded motion picture and 4K burst files can be divided in two. It is recommended for
when you want to divide a part you need with a part you do not need.
Dividing a file is permanent. Decide before you divide!
> [Playback] > [Video Divide]
MENU
1
Press 2/1 to select the file to divide, and then press [MENU/SET].
2
Press 3 at the location to divide.
• You can finely adjust the location for division by pressing
2/1 while the file is paused.
3
Press 4.
• The file may be lost if the card or battery is removed while
processing the dividing.
¥ It may not be possible to divide a file at a point near the beginning or end.
¥ This function is not available in the following case:
– When the recording time is short.
64
DVQX1749 (ENG)
/ /
3 4
and to select more frames to combine.
1 2
to select , and then press [MENU/SET].
[Save]
/ to select the
2 1