Panasonic Lumix DC-G95 Basic Owner's Manual page 22

Preparation/Basic
Changing the Monitor Position
At the time when this camera is purchased, the monitor is stowed in the camera body.
Bring out the monitor as shown below.
1 Open the monitor. (It opens up to 180o.)
2 It can be rotated 180o forward.
3 Return the monitor to its original position.
¥ When rotating the monitor, be careful not to apply too much force. Doing so may cause
damage.
¥ When not using the monitor it is recommended that you close it with the screen facing inward
to prevent dirt and scratches.
Setting the Clock (When Turning On for the First Time)
• The clock is not set when the camera is shipped.
1
Turn the camera on.
2
Press [MENU/SET].
3
Press 3/4 to select the language, and press [MENU/
SET].
4
Press [MENU/SET].
5
Press 2/1 to select the items (year, month, day,
hour, minute), and press 3/4 to set.
6
Press [MENU/SET] to set.
7
When [The clock setting has been completed.] is
displayed, press [MENU/SET].
8
When [Please set the home area] is displayed, press
[MENU/SET].
9
Press 2/1 to select the home area, and then press
[MENU/SET].
22
DVQX1749 (ENG)