Panasonic Lumix DC-G95 Basic Owner's Manual page 26

Preparation/Basic
Allows you to set the aperture, shutter speed, and other settings when in
modes.
Mode dial
Temporarily changing the items assigned to the front/rear dials ([Dial Operation
Switch])
1
Set a Fn button to [Dial Operation Switch]. (P30)
• This function is set in Fn button (Fn1) at the time of purchase.
2
Press the Fn button.
• A guide will be displayed showing the items temporarily
assigned to the front/rear dials.
• If no operations are performed, the guide will disappear in
a few seconds.
3
Rotate the front/rear dials while the guide is
displayed.
4
Press [MENU/SET] and set.
• You can also complete this step by performing either of the
operations below:
– Press the shutter button halfway
– Press the Fn button
¥ You can set the following settings in [Dial Set.] of the [Custom] ([Operation]) menu.
– Operation methods of the front/rear dials
– Operation method of the control dial
– Items to be assigned temporarily to the front/rear dials in [Dial Operation Switch]
26
DVQX1749 (ENG)
Front dial
Program Shift
Aperture value
Shutter speed
Aperture value
/ /
Rear Dial
Program Shift
Aperture value
Shutter speed
Shutter speed
0
WB WB WB WB WB WB WB WB WB WB WB
AWB AWB
AWBc AWBw AWBc AWBw
/
WB WB WB WB
ISO ISO ISO ISO
98 98 98
ISO ISO ISO ISO