Connection Settings - CipherLab 9500 Reference Manual

3.4 CONNECTION SETTINGS

There are two ways to access the connections settings:
Go to Start | Settings | Control Panel and select Network and Dial-up
Connections.
Go to Start | Settings | Network and Dial-up Connections.
Connections Description
This is a shortcut to USB Connection, and the selected interface is USB for factory
setting. This connection is reflected in the control panel for direct PC connection.
Start | Settings | Control Panel |
The USB connection is specifically for performing the ActiveSync operation via the
cradle. Generally, it will automatically establish the connection and start the
ActiveSync operation when you seat the mobile computer in the cradle. To stop
the ActiveSync operation, simply remove the mobile computer.
Alternatively, you may double-tap the status icon
[Disconnect].
When connected, the status icon will appear on the taskbar.
When disconnected, this icon will disappear.
Chapter 3 Configuring 9500 Mobile Computer
Ignore [Properties] as any changes made
will affect ActiveSync connection.
from the taskbar and tap
55