Table of Contents
Advertisement
1.3.3 FUNCTION KEY
The [Func] (= Function) key serves as a modifier key, and the functionality of each key
combination is application-dependent.
1) To enable this modifier key, press
the status bar.
2) Now press another key to get the value of key combination (say, press [1] to get the
value of F1). The icon will go off now.
3) To get the value of another key combination modified by the [Func] key, repeat the
above steps.
4) To abort the key modification, press
Note: It is not necessary to hold down the [Func] key.
Below is a list of the factory setting for a variety of key combinations.
Key Combination
,
,
,
,
,
,
,
Note: Press the [Func] key first, and then press the second key for a specific function.
1.3.4 TASK KEY
By default, the [Task] key is undefined. It can be programmed as a shortcut key for a
specific program or action. Refer to Windows CE Products Programming Guide for the
supplied API – SetKeyPadBind().
Action
PgUp (red-coded): move text up one screenful
PgDn (red-coded): move text down one screenful
Home (red-coded): move to the beginning of screen or document
End (red-coded): move to the end of screen or document
Toggle ON/OFF the backlight of keypad only
Turn ON the backlight of LCD and decrease its luminosity
Turn ON the backlight of LCD and increase its luminosity
Chapter 1
Using 9500 Mobile Computer
on the keypad. Its icon
again, and the icon will go off.
will appear on
23
Advertisement
Table of Contents
