Video Settings (Video) - Sony RDR-GX33 Operating Instructions Manual

Video Settings (Video)

Video settings will adjust items related to the
image, such as size and color.
Choose the settings according to the type of
TV, tuner, or decoder connected to the DVD
recorder.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Video," and press ENTER.
The "Video" setup appears with the
following options. The default settings
are underlined.
Video Output
TV Type
Sets the picture size when playing back a title
recorded from 16:9 size video (page 42) or a
16:9 size commercial DVD video.
Select the playback picture size according to
the type of connected TV (wide-screen/wide
mode TV or conventional 4:3 screen TV).
16:9
4:3 Letter
Box
4:3 Pan
Scan
74
Select this when connecting
to a wide-screen TV or TV
with a wide mode function.
Select this when connecting
to a 4:3 screen TV. Displays a
wide picture with bands on
the upper and lower portions
of the screen.
Select this when connecting
to a 4:3 screen TV.
Automatically displays a
wide picture on the entire
screen and cuts off the
portions that do not fit.
16:9
4:3 Letter Box
4:3 Pan Scan
b
Note
Depending on the disc, "4:3 Letter Box" may be
selected automatically instead of "4:3 Pan Scan" or
vice versa.
Y/Pb/Pr Out Black Level
Selects the black level (setup level) for the
video signals output from the
COMPONENT VIDEO OUT
(page 16).
This setting is not effective when the recorder
outputs progressive signals.
On Raises the standard black
level. Select this when the
picture appears too dark.
Off
Sets the black level of the
output signal to the standard
level. Normally, select this.
Progressive Output
If your TV accepts progressive (480p) format
signals, set "Progressive Output" to "On."
You will enjoy accurate color reproduction
and high quality images.
1
Select "Progressive Output," and press
ENTER.
2
Select "On," and press ENTER.
The display asks for confirmation.
3
Select "Start," and press ENTER.
The video switches to a progressive
signal for 5 seconds.
4
If video signal appears OK, select "Yes,"
and press ENTER.
If picture is distorted, select "No," and
press ENTER.
jacks