Changing The Name Of A Recorded Program - Sony RDR-GX33 Operating Instructions Manual

5. Changing the Name of
a Recorded Program
+ - RW - RW
RW
VR
Video
- R
Video
You can label a DVD, title, or program by
entering characters. You can enter up to 64
characters for a title or disc name, but the
actual number of characters displayed in the
menus such as the Title List will vary. The
steps below explain how to change the name
of the recorded program.
Number
buttons,
SET
TITLE LIST
1
Press TITLE LIST.
2
Select a title, and press ENTER.
The sub-menu appears.
3
Select "Title Name," and press
ENTER.
The display for entering characters
appears.
4
Press </M/m/, to move the cursor
to the right of the display and select
"A" (upper-case), "a" (lower-case),
or "Symbol," and press ENTER.
The characters for the selected type are
displayed.
+ - R
R
VR
INPUT
SELECT
</M/m/,,
ENTER
5
Press </M/m/, to select the
character you want to enter, and press
ENTER.
The selected character appears at the top
of the display.
Example: Input Title Name
The type of characters will change
according to the language you select in
"Easy Setup." Some languages allow you
to enter an accent mark.
To enter a letter with an accent mark,
select an accent followed by the letter.
Example: Select " ` " and then "a" to
enter "à."
To insert a space, select "Space."
6
Repeat steps 4 and 5 to enter the
remaining characters.
Input row
To erase a character, move the cursor to
the right of the character at the input row.
Select "Back" and press ENTER.
To insert a character, move the cursor to
the right of the point where you want to
insert the character. Select the character
and press ENTER.
To erase all of the characters, select
"Clear All" and press ENTER.
7
Select "Finish," and press ENTER.
To cancel the setting, select "Cancel."
33
,continued