Osd (On-Screen Display) - Sony RDR-GX33 Operating Instructions Manual

3
Select "Full Auto," and press ENTER.
Yes Automatically sets your
time zone and Daylight
Saving Time (if
applicable).
No Allows you to adjust
your time zone and
Daylight Saving Time
manually, without
turning off the Auto
Clock Set function.
4
Select "Yes," and press ENTER.
The recorder automatically sets the clock
by searching for a channel that carries a
time signal and sets your time zone and
Daylight Saving Time (if applicable).
• If the clock does not activate, your
clock setting is incorrect. After
repeating steps 1 to 3 above, select
"No" in step 4 and press ENTER. Then
select "Clock Set CH," "Time Zone,"
or "Daylight Saving" and press
ENTER. Adjust these settings by
pressing M/m and ENTER.
Clock Set CH
Select a channel that carries a time signal
using the number buttons.
Use this option if you know of a channel
that carries a time signal. Most PBS
member stations broadcast a time signal.
For the fastest response select your local
PBS station. Leave the setting at "--" to
have the recorder automatically search
for a channel that carries a time signal.
To return to "--," enter "0."
Time Zone
Select the time zone for your area, or
select "Auto" to have the recorder
automatically set your time zone.
The options are:
Auto y Atlantic y Eastern y
Central y Mountain y Pacific y
Alaska y Hawaii y Auto
Daylight Saving
Select "On" or "Off" (standard time), or
select "Auto" to have the recorder
automatically set the daylight saving
time.
z Hint
If you set "Full Auto" to "Yes," the Auto Clock Set
function is activated whenever the recorder is
turned off.
Manual (Manual Clock Set)
If the Auto Clock Set function did not set the
clock correctly for your local area, set the
clock manually.
1
Select "Clock" in "Basic," and press
ENTER.
2
Select "Manual," and press ENTER.
3
Press M/m to set the month, and press
,.
Set the day, year, hour, and minutes in
sequence. Press </, to select the item
to be set, then press M/m to set the
numbers. The day of the week is set
automatically.
4
Press ENTER to start the clock.
z Hint
To change the numbers in step 3, press < to return
to the item to be changed, and select the numbers by
pressing M/m.

OSD (On-Screen Display)

Switches the display language on the screen.
73