Step 3: Connecting The Audio Cords - Sony RDR-GX33 Operating Instructions Manual

Step 3: Connecting the Audio Cords

Select one of the following patterns, A or B, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver). This will enable you to listen to sound.
Rear (L)
Front (L)
Center
: Signal flow
* The yellow plug is used for video signals (page 16).
A Digital audio input jack
If your AV amplifier (receiver) has a Dolby
*2
Digital or DTS
jack, use this connection. You can enjoy
Dolby Digital (5.1ch) and DTS (5.1ch)
surround effects.
18
[Speakers]
to DIGITAL OUT (COAXIAL)
to LINE OUT (R-AUDIO-L)
(white)
(red)
(yellow)*
decoder and a digital input
AV amplifier (receiver)
with a decoder
to coaxial digital input
Coaxial digital cord (not supplied)
Audio/video cord
(supplied)
B Audio L/R (left/right) input jacks
*1
This connection will use your TV's or stereo
amplifier's (receiver's) two speakers for
sound.
[Speakers]
Rear (R)
Front (R)
Subwoofer
DVD recorder
INPUT
VIDEO
(yellow)
L
(white)
AUDIO
R
(red)
TV, projector, or AV
amplifier (receiver)
A
B