A: Cable box or satellite receiver with a video/audio output
With this hookup, you can record any channel on the cable box or satellite receiver. Be sure that
the satellite receiver or cable box is turned on.
To watch cable or satellite channel, you need to match the channel on the recorder (L1) to the
input jack connected to the cable box or satellite receiver (LINE 1 IN).
Cable box/satellite receiver
AUDIO
OUT
R
Audio/video cord
(not supplied)
to LINE 1 IN
: Signal flow
z Hints
• If your cable box or satellite receiver has an S-video jack, you can use an S-video cord (not supplied)
instead of the audio/video cord.
• If you connect an S-video cord to the LINE 1 IN jack, set "Line1 Input" of the "Line Input" to "S Video"
in the "Video" setup (page 75).
VIDEO
OUT
S VIDEO
ANT IN
L
S-video cord
(not supplied)
Antenna cable
(supplied)
TO TV
to antenna input
Wall
TV
DVD recorder
,continued
13