Step 3: Connecting The Audio Cords/Hdmi Cord - Sony RDR-HX780 Operating Instructions Manual

Step 3: Connecting the Audio Cords/HDMI Cord

Select one of the following patterns, A or B, according to the input jack on your TV monitor,
projector, or audio component such as an AV amplifier (receiver). This will enable you to
listen to sound.
[Speakers]
Rear (L)
Front (L)
Center
: Signal flow
* The yellow plug is used for video signals (page 18).
A Digital audio input jack
If your audio component has a Dolby
*2
Digital, DTS , or MPEG audio decoder and
a digital input jack, use this connection. You
can enjoy Dolby Digital (5.1ch), DTS
(5.1ch), and MPEG audio (5.1ch) surround
effects.
Audio component with
a decoder
or
HDMI cord
(not supplied)
to HDMI OUT
to LINE OUT (R-AUDIO-L)
(white)
(red)
Audio/video cord
(supplied)
(yellow)*
*1
[Speakers]
to coaxial/HDMI digital input
Coaxial digital cord
(not supplied)
to DIGITAL OUT (COAXIAL)
(yellow)
(white)
(red)
If you connect a Sony audio component that
is compatible with the "Control for HDMI"
function, refer to the operating instructions
supplied with the audio component.
A
Rear (R)
Front (R)
Subwoofer
DVD recorder
B
INPUT
VIDEO
L
AUDIO
R
TV, projector, or
audio component
,continued
21