Viii. Function Indicator Lamps - KB Electronics KBRG-212D Installation And Operating Instructions Manual

Regenerative drive. variable speed scr control. designed for shunt wound and pm dc motors. full wave - 4 quadrant.

Hide thumbs Also See for KBRG-212D:

Table of Contents

F. Response Trimpot (RESP) – This trimpot determines the dynamic response of the

control. The factory setting is approximately 50% of full rotation. The setting may be

increased if a faster response is required. Note: If response is made too fast, unstable

operation may result.

VIII. FUNCTION INDICATOR LAMPS.

A. Power On (PWR ON) – Indicates that the drive is energized with the AC line.

B. Overload (OL) – Indicates the control has reached the current limit set point which has

been established by the position of jumper J3 and the FWD CL and REV CL trimpot

settings. In transient load applications it is normal for this light to blink.

IX.

KBRG-212D ACCESSORIES

•

Bipolar Signal Isolator

•

4-Quad Accel/Decel

•

Multi Speed Board

KB P/N 8801

KB P/N 8803

KB P/N 8814

Table of Contents