WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Remove the
base
cover.
Procedure
1
Remove the two screws (M2x3.5) that secure the right display hinge to the I/O board.
2
Lift the right display hinge away from the I/O board.
3
Peel the tape that secures the I/O-board cable to the I/O board.
4
Open the latch and disconnect the I/O-board cable from the I/O board.
5
Slide and lift the I/O board off the palm-rest assembly.
28
Removing the I/O board
computer. After working inside your computer, follow the instructions in
Removing the I/O board
14
After working inside
www.dell.com/