Table of Contents
Advertisement
Replacing the power button with fingerprint
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE:
Applicable only for computers that are shipped with fingerprint reader.
Procedure
1
Align the power button with fingerprint reader on the keyboard bracket and adhere the tape that secures the power button with
fingerprint reader on the keyboard bracket.
2
Place the power button with fingerprint reader on the keyboard bracket.
3
Connect the fingerprint-reader cable to power button with fingerprint reader and close the latch to secure the cable.
4
Follow the procedure from step 3 to step 8 in
Post-requisites
1
Replace the
system
board.
2
Replace the
I/O
board.
3
Replace the
display
assembly.
4
Replace the fan.
computer. After working inside your computer, follow the instructions in
"Replacing the
keyboard".
www.dell.com/
Replacing the power button with fingerprint reader
35
reader
After working inside
63
Hide quick links:
Advertisement
Table of Contents
