Listening To The Radio - Sony MEX-DV2100 Operating Instructions Manual

Listening to the radio

SOURCE
SEEK MODE
1
Press (SOURCE) repeatedly until "TUNER" appears.
2
Press (MODE) repeatedly until the desired band (FM1, FM2, FM3, MW
or LW) appears.
3
Perform tuning.
To tune automatically
Press (SEEK)
Scanning stops when the unit receives a station. Repeat this procedure until the desired station
is received.
To tune manually
Press and hold (SEEK)
repeatedly to fine adjust to the desired frequency.
Tip
For details on other radio functions, see "Advanced Operations — Radio" on page 36.
With the card remote commander
Use (SRC) instead of (SOURCE), and .m/M> instead of (SEEK) –/+.
20
A B
+.
–/
+ to locate the approximate frequency, then press (SEEK)
–/
Z Z
X
SRC
A Radio band/Function
B Frequency*
* While receiving an RDS station, program service
name appears. For details, see "RDS" on page 37.
.m/M>
MODE
+
–/