Makita HP332D Technical Information page 7

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Drill chuck
(HP332D, DF332D)
DISASSEMBLING
Fig. 10
Socket 19-52
(Pt. no.134842-4)
Fig. 11
Pin
Fig. 12
Spindle
1R038
1R038
Socket 19-52
(Pt. no.134842-4)
(e)
Bit adapter
(e)
1R231
4. Fix 1R038 and Socket 19-52 (pt.No.134842-4)
with vise. See Fig. 10.
< Note >
Socket 19-52 has to be used MAKITA genuine
Socket 19-52 (Pt. No.134842-4).
Carrier complete can not be inserted into
Vise
Socket sold on the market.
(e)
Nut spinner handle
(9)
P 7/ 20
5. Set Carrier complete (e)
to Socket 19-52 by fitting
pin portion to the socket
hole.
See Fig. 11.
6. Set Keyless drill chuck 10 (9)
to Carrier complete (e),
inserting Spindle into Carrier
complete (e).
See left photograph in Fig. 12.
7. Attach 1R231 to Bit adapter
and mount the Bit adapter to
Nut spinner handle.
See right photograph in Fig. 12.
8. Inserting another end of 1R231
into Keyless drill chuck 10 (9),
fix the 1R231 firmly with
Keyless drill 10 (9).
See right photograph in Fig. 12.
9. Turn Nut spinner handle counter
clockwise. So, the Drill chuck
is removed.
See right photograph in Fig. 12.