Makita HP332D Technical Information page 12

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Gear assembly, Motor section
ASSEMBLING
Fig. 24
Fig. 25
Motor section
Fig. 26
(14)
Protruded portion
of Housing set L
1. Insert Rotor (15) into Stator (14) while being careful to the following
points.
* Hold the Fan portion to avoid pinching your finger with Rotor fan
and edge of Stator.
(15)
* Insert Rotor into Stator slowly and vertically, to avoid scratching
and damage to wiring board of Stator
See Fig. 24.
(14)
(11)
Notch of Stator
(11)
(17)
2. Join Motor section with Gear assembly (11).
See Fig. 25.
3. Set Motor section and Gear assembly
entirely to Housing set L (17), by fitting
the notch of Stator to the protruded
portion of housing set L (17).
See Fig. 26.
P 12/ 20