Makita HP332D Technical Information page 5

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Drill chuck
(HP332D, DF332D)
DISASSEMBLING
If it is difficult to remove in the method of A, remove Drill chuck with Impact driver and DTW450.
See Fig.5.
B. Removing with Bit adapter, 1R231, Impact driver Mod. DTW450
Fig. 5
1R231
Bit adapter
(9)
1R231
Bit adapter
Fig. 6
(9)
1R231
Bit adapter
DTW450
1. Set 1R231 to Bit adapter and
2. Inserting another end of 1R231 into
Keyless Drill chuck 10 (9), grip it
with the Drill chuck (9).
See the lower photograph in Fig. 5.
DTW450
3. Hold the machine to be repaired,
4. Turn TW450D counter clockwise by
pressing the upper portion of Switch
trigger, designated with yellow arrow.
See the lower photograph in Fig. 5.
DTW450
5. Now, Keyless Drill chuck 10 (9) is
attach the Bit adapter to DTW450.
See the upper photograph in Fig. 5.
pressing firmly toward work bench
designated with red arrow by hand.
See the lower photograph in Fig. 5.
removed from Spindle.
See Fig. 6.
P 5/ 20