Unpacking; Hooking Up The System - Sony DVP-S7000 Operating Instructions Manual

Getting Started Getting Started

Unpacking

Check that you have the following items:
• Audio connecting cord (1)
• Video connecting cord (1)
• S video cable (1)
• S-link cable (1)
• Remote commander (remote) RMT-D100A (1)
• Sony SUM-3 (NS) batteries (2)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two R6 (size AA) batteries by matching the + and
– on the batteries. When using the remote, point it at
the remote sensor g on the player.
z
You can control Sony TVs with the g mark using the
supplied remote
See page 42.
z
When to replace batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the player,
replace all the batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you will not use the remote for an extended period of
time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
EN
6

Hooking Up the System

Overview
This section describes how to hook up the CD/DVD
player to a TV (with audio/video input jacks) and/or
an amplifier. You cannot connect this player to a TV
without a video input connector. Be sure to turn off
the power of each component before making the
connections.
pTo listen to the sound through TV speakers
CD/DVD player
To VIDEO
To AUDIO
OUT
OUT
: Signal flow
pTo listen to the sound through speakers connected to
an amplifier
CD/DVD player
To To
AUDIO VIDEO
OUT OUT
To video input
To audio
input
Amplifier
: Signal flow
To an AC outlet
TV
To video
input
To audio
input
To an AC outlet
To an AC
TV outlet
To an AC outlet
To an AC outlet