Resuming Playback From The Point Where You Stopped A Disc (Resume Play) - Sony DVP-S7000 Operating Instructions Manual

Playing Discs in Various Modes
8
Press · to start Program Play.
To cancel Program Play
Press MENU to display the menu on the TV screen. Then set
"PROGRAM" in "PLAY MODE" to "OFF."
To cancel programming
Press MENU.
To change programming
1 In Step 5, select the program number of the title, chapter or
track you want to change using >/..
2 Follow Step 6 for new programming.
To cancel the programmed order
To cancel all the titles, chapters or tracks in the programmed
order, select "ALL CLEAR" in Step 5.
To cancel a title, chapter or track programmed, select the title,
chapter or track you want to clear in Step 5, then select
"CLEAR" in Step 6.
z
The program remains even after the Program Play
ends
When you press ·, you can play the same program
again.
z
You can do Repeat Play or Shuffle Play of the
programmed titles, chapters or tracks
After programming, set "REPEAT" to "DISC"or
"SHUFFLE" to "ON" in the menu.
Notes
The number of titles, chapters or tracks displayed are that
of the titles, chapters or tracks recorded on a disc.
The program is canceled when:
– you open or close the disc tray
– you turn the power off
• You may not be able to do Program Play depending on the
DVD.
EN
36
Resuming Playback from the
Point Where You Stopped a
Disc (Resume Play)
The player stores the point where you stopped a disc if
"RESUME" appears on the front panel display. In this
case, you can resume playback from that point.
As long as you do not remove the disc, Resume Play is
available even if you turn the power off.
1
While playing a disc, press π to stop playback.
"RESUME" appears in the front panel display and
"WHEN PLAYING NEXT TIME, DISC RESTARTS
FROM POINT YOU STOPPED." appears on the
TV screen.
If "RESUME" does not appear, Resume Play is not
available.
2
Press ·.
The player starts playback from the point you
stopped the disc in Step 1.
z
To play from the beginning of the disc
When "RESUME" appears on the front panel display
before you start playing, press π to turn off "RESUME,"
then press ·.
Notes
• You may not do Resume Play depending on the DVD.
• Resume Play is not available in Shuffle or Program Play
mode.
• Depending on where you stopped the disc, the player may
resume playback from a different point.
• The point where you stopped playing is cleared when:
– you open or close the disc tray
– you disconnect the AC power cord
– you change the play mode
– you start playback after selecting a title, chapter or track
– you change the setting of "VIDEO ASPECT RATIO,"
"DVD MENU LANGUAGE" or "PARENTAL CONTROL"
in "INITIAL SETUP" in the menu
· π