Mounting Flange For Sighting Tube (A-Mf-St); Extraction Tool For Endurance (E-Tjet); Figure 4-8: Mounting Flange For Sighting Tube; Figure 4-9: Extraction Tool For Endurance Sensors - Fluke ThermoJacket User Manual

ThermoJacket
Users Manual, Rev. 1.1, Jan 2019

4.5 Mounting Flange for Sighting Tube (A-MF-ST)

The mounting flange is used to adapt different kind of sighting tubes to the ThermoJacket. The mounting
flange has an inner thread to screw in and fix a selected sighting tube.

4.6 Extraction Tool for Endurance (E-TJET)

The extraction tool (E-TJET), made of stainless steel, eases the extraction/ejection of an Endurance
of the ThermoJacket cooling case.
26
info@Raytek-Direct.ca

Figure 4-8: Mounting Flange for Sighting Tube

Figure 4-9: Extraction Tool for Endurance Sensors

® sensor out
1.800.561.8187