Adjustable Mounting Base (A-Tj-Mb); Figure 4-2: Adjustable Mounting Base - Fluke ThermoJacket User Manual

4.2 Adjustable Mounting Base (A-TJ-MB)

The adjustable mounting base provides stable, permanent placement of the ThermoJacket while allowing the
ThermoJacket to pivot 360° and position 90° forward.
Installing the Adjustable Mounting Base to the ThermoJacket:
1. Mount the adjustable mounting base (item 6) onto the desired surface with four screws (1/4" 20 UNC or
M6 x 1).
2. Loosen the cap screw (item 3) with the 1/4" hex key.
3. Unscrew the setscrew (item 2) with a screwdriver.
4. Remove the adapter (item 1) from the journal.
5. Attach the adapter (item 1) to the ThermoJacket either bottom or top with two screws (1/4" 20 UNC or
M6x1) (item 7).
6. Insert the ThermoJacket with adapter (item 1) attached back into the journal (item 4).
7. Tighten the 1/4" cap screw (item 3).
Adjusting the Mounting Base:
8. Loosen the collar (item 5) and the cap screw (item 3) with the 1/4" hex key enough to allow the adapter
(item 1) to pivot and the journal (item 4) to rotate.
9. Adjust the ThermoJacket sighting by rotating and pivoting the ThermoJacket body.
10. Tighten the collar (item 5) first, then tighten the cap screw (item 3).
info@Raytek-Direct.ca

Figure 4-2: Adjustable Mounting Base

Accessories
Adjustable Mounting Base (A-TJ-MB)
1.800.561.8187
4
21