ThermoJacket
Users Manual, Rev. 1.1, Jan 2019
3.2 Disassembly
Thermalert 4.0
Removal of the sensor is the reverse of installation.
To aid removal, firmly rotate the head so the head
connector post slides across (up) the cam ramp.
16
info@Raytek-Direct.ca
Figure 3-4: Sensor with Rear Adapter
Endurance
To aid removal, firmly rotate the head so the head
connector post slides across (up) the cam ramp. If
needed, use the extraction tool E-TJET available as
accessory.
Figure 3-5: Sensor with Extraction Tool
For more information, see section 4.6
for Endurance
(E-TJET), page 26.
Extraction Tool
1.800.561.8187