Getting Started; Unpacking - Sony DVP-S360 Operating Instructions (CD/DVD Component) Operating Instructions Manual

Getting
Started
This section describes how to hook up
the CD/DVD player to a TV (with
audio/video input jacks) and/or an
AV receiver (amplifier). You cannot
connect this player to a TV which
does not have a video input
connector. Be sure to turn off the
power of each component before
making the connections.

Unpacking

Check that you have the following items:
• Audio/video connecting cord (1)
• Remote commander (remote) RMT-D116A (1)
• Size AA (R6) batteries (2)
• Plug adaptor (1) (DVP-S365 only)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two Size AA (R6) batteries by matching the + and –
ends on the batteries to the markings inside the
compartment. When using the remote, point it at the
remote sensor on the player.
z
You can control TVs or AV receivers (amplifier) using the
supplied remote
See page 53.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or lighting
apparatuses. Doing so may cause a malfunction.
• If you do not use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
7