Getting Started - Sony DVP-NC650V Service Manual

VIEWER (page 50)
z
Each time you press DISPLAY, the Control Menu display changes as follows:
, Control Menu display 1
m
Control Menu display 2
m
ADVANCED display (Appears if you select any setting other than "OFF." See page 55.)
m
Control Menu display off
z
The Control Menu icon indicator lights up in green
"OFF" ("SURROUND," "PROGRAM," "SHUFFLE," "REPEAT," "A-B REPEAT," "BNR," "DIGITAL VIDEO
ENHANCER" only). The "ANGLE" indicator lights up in green only when the angles can be changed. The "VIDEO
EQUALIZER" indicator lights up in green when any setting other than "STANDARD" is selected.
14
Step 3: TV Hookups
Connect the supplied audio/video cord and power cord in the order (1~3) shown below. Be
sure to connect the power cord last.
1 Audio/video cord
(supplied)
to LINE OUT L/R
(AUDIO) 1
(white)
to LINE OUT
(VIDEO) 1
(yellow)
(red)
SACD/DVD Player
l: Signal flow
When connecting to a wide screen TV
Depending on the disc, the image may not fit your TV screen.
If you want to change the aspect ratio, please refer to page 79.
16
Divides the screen into 9 sub-screens to help
you find the scene you want quickly.
t
when you select any item except
to video input
(yellow)
(yellow)
(white)
(white)
(red)
(red)
to audio input
TV
2 Power source
3 Power source

Getting Started

Quick Overview
A quick overview presented in this chapter will give you enough information to start using the
player for your enjoyment. To use the surround sound features of this player, refer to "Hookups"
on page 18.
Notes
• You cannot connect this player to a TV that does not have a video input jack.
• Be sure to turn off the power of each component before connecting.
Step 1: Unpacking
Check that you have the following items:
• Audio/video cord (pinplug x 3 y pinplug x 3) (1)
• Remote commander (remote) RMT-D133A (1)
• Size AA (R6) batteries (2)
• S VIDEO cord (1)
Step 2: Inserting Batteries into the Remote
You can control the player using the supplied remote. Insert two size AA (R6) batteries by
matching the 3 and # ends on the batteries to the markings inside the compartment. When using
the remote, point it at the remote sensor
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
Step 4: Playing a Disc
A Turn on the TV.
B Switch the input selector on the TV to the player.
C Press POWER on the player.
D Press
on the player to open the disc tray.
A
E Place the disc on the tray with the playback side facing down.
F Press
.
H
The disc tray closes and the player begins playing the disc.
After Step 6
Depending on the disc, a menu may be displayed on the TV screen. If so, select the item you want
from the menu and play the DVD (page 37) or VIDEO CD disc (page 39).
To stop playing
Press x.
To take out the disc
Press A.
To turn off the player
Press ?/1 on the remote. The player is set to standby mode and the power indicator lights up in
red. Press POWER on the player to turn off completely.
1-3
on the player.
continued
Disc compartment number
With the playback side facing down


15 15
17 17