Specifications - Sony DVP-S360 Operating Instructions (CD/DVD Component) Operating Instructions Manual

Specifications

CD/DVD player
Laser Semiconductor laser
Signal format system
NTSC
Audio characteristics
Frequency response
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1
dB)*
DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5
dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 110 dB (AUDIO OUT connectors
only)
Harmonic distortion
Less than 0.003 %
Dynamic range
More than 100 dB (DVD)
More than 97 dB (CD)
Wow and flutter
Less than detected value
(±0.001 % W PEAK)
Outputs
Jack Output
type level
Phono 2 Vrms
AUDIO OUT
jacks (at 50 kilohms)
(1, 2)
Optical –18 dBm
DIGITAL OUT
output
(OPTICAL)
connector
Phono 0.5 Vp-p
DIGITAL OUT
jack
(COAXIAL)
Phono 1.0 Vp-p
VIDEO OUT
jack
(1, 2)
S VIDEO OUT 4-pin Y: 1.0 Vp-p
(1, 2) mini DIN
C: 0.286 Vp-p
COMPONENT Phono Y: 1.0 Vp-p
jacks
VIDEO OUT
(Y, P /B-Y,
B
P /B-Y,
P /R-Y)
B
R
P /R-Y:
R
0.7 Vp-p
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Supplied accessories
See page 7.
* The signals from AUDIO OUT connectors are measured. When you
play PCM sound tracks with a 96 kHz sampling frequency, the
Load impedance
output signals from the DIGITAL OUT (OPTICAL, COAXIAL) are
converted to 48 kHz (sampling frequency).
Over 10 kilohms
Design and specifications are subject to change without notice.
Wave length: 660 nm
E
NERGY
As an
determined that this product meets the
75 ohms terminated
guidelines for energy efficiency.
75 ohms,
sync negative
75 ohms,
sync negative
75 ohms terminated
75 ohms,
sync negative
75 ohms
DVP-S360/DVP-S363
120 V AC, 60 Hz
DVP-S365
110-240 V AC, 50/60 Hz
DVP-S360/DVP-S363
13 W
DVP-S365
14 W
430 69 252 mm
3
(17 2 ⁄ 10 in.) (w/h/d)
4
incl. projecting parts
2.8 kg (6 lb 3 oz)
41 ˚F to 95 ˚F
(5 ˚C to 35 ˚C)
25 % to 80 %
S
R
TAR is a U.S. registered mark.
E S
R
NERGY TAR Partner, Sony Corporation has
E S
R
NERGY TAR
59