Installation And Operation; Transportation And Storage; Gear Conditions At Delivery - Harmonic Drive HFUS-2A Series Engineering Data

5. Installation and Operation

5.1 Transport and Storage
Gears should be transported in the original packaging. If the gear is not put into service immediately on receipt, it should be
stored in a dry area in the original packaging. The permissible storage temperature range is -20° C to +60° C.
5.2 Gear Condition at Delivery
The gears are generally delivered according to the dimensions indicated in the confirmation drawing.
The three basic components of the gear - the Flexspline, Wave Generator and Circular Spline - are matched and labelled in the
factory. Depending on the product they are either greased or prepared with preservation oil. Then the individual components
are assembled. If you receive several units, please be careful not to mix the matched components. This can be avoided by
verifying that the final numbers of the assembled gear components are identical.
35
1019658 11/2014