Figure 3-5(A) : The Procedure For Attaching The Battery Pack On The Wall - Delta BX 6.0 Operation And Installation Manual

To mount the battery pack on the wall, please follow the procedure below :
Mount the bracket and the battery pack at the same time.
1. Use 2 screws to fix the bottom part of the mounting bracket.
Drill holes at the locations marked first. Please refer to Figure 3-2 for the
wall mounting bracket dimensions.
2. Hang the battery pack on the wall.
3. Use screws in order to fix rest of the holes as shown in Figure 3-5(a).
Screw the wall mounting bracket on the wall with at least 6 M8 Phillips head
screws are allowable as shown in Figure 3-3.
①

Figure 3-5(a) : The procedure for attaching the battery pack on the wall

- Please fix at least 6 M8 Phillips head screws for the wall mounting bracket.
- The bracket shipped with the battery pack is specially designed and should be
the only mounting device for the mechanical installation.
②
③
①
CAUTION !
21
Installation
③