3 Installation; Installation Environment - Delta BX 6.0 Operation And Installation Manual

3 Installation
- Do not install the battery pack near or on flammable surfaces.
- Please mount the battery pack tightly on a solid / smooth surface.
The chapter contains instructions for (1) Installation environment
(2) Mechanical installation; (3) Electrical Installation; (4) Communication setup.

3.1 Installation Environment

- The optimal temperature range for the battery pack to operate is 10 to
- If the ambient temperature is outside the optimal operating range, the battery
pack will be derating.
- The operating humidity is within the range from 0 to 90%.
- If the ambient temperature is outside the operating range, the battery pack
stops to protect itself from any unexpected damage.
The battery pack is designed to be waterproof and can be installed both indoors
and outdoors. However, please avoid exposure to direct sunlight, high temperature
and high humidity if installed outdoors.
Please avoid using in the following condition; otherwise the device may malfunction.
• Locations where IP55 isn't satisfied.
• Locations where temperature changes severely.
• Locations where the device is directly exposed to saltwater, sea breezes and
high humidity.
• Locations that are or might be affected by explosive, combustible, corrosive
and other poisonous gases.
• Location exposed dust and dirt.
• Location with poor ventilation.
• Locations with other special conditions.
• At altitude above 2000m.
WARNING !
CAUTION !
17
Installation
30℃.