Mechanical Installation - Delta BX 6.0 Operation And Installation Manual

Installation

3.2 Mechanical Installation

- This battery pack should be installed by a trained and experienced installer
designated by the retailer.
- Having the product installed by a non-specialized installer is very dangerous
and can cause damage or injury.
- Please fix at least 6 M8 Phillips head screws for the wall mounting bracket.
- The bracket shipped with the battery pack is specially designed and should be
the only mounting device for the mechanical installation.
- The wall used for mounting should be 90°±2° to or the horizontal reference.
- Make sure there is enough room for the battery pack, especially in front of it.
- Always install the battery pack with 2 or more people.
- Please make sure that the battery pack stands on the floor when mounting it to
the floor or to a wall.
- Please check the space for installation which meets the recommended location.
- Remember that we will in no way be responsible for damage resulting from the
battery pack falling due to insufficient mounting strength.
This battery pack is designed to be wall-mounted or to stand on the floor fixed.
Please ensure that the installation is perpendicular to the floor.
Please follow the instructions as shown from Figure 3-1 through 3-5.
Please make sure there is enough room for the battery pack, especially in front
of the battery pack (LED indicators).
WARNING !
CAUTION !
ATTENTION
18