Specifications - Honeywell Pressuretrol P7810A Product Data

P7810A-D PRESSURETROL® CONTROLLER

SPECIFICATIONS

Models:
P7810A Pressuretrol® Controller with on/off control.
P7810B Pressuretrol® Controller with on/off control and
modulate.
P7810C Pressuretrol® Controller with on/off control; modulate
and safety high limit.
P7810D Pressuretrol® Controller with on/off control and
safety high limit.
Electrical Ratings:
Power Input: 120 Vac (10%/-15%), 50/60 Hz.
Power Consumption: See Table 1.
Table 1. Power Consumption.
Rating
Watts 2.8
VA 7.0
Switch Contact Ratings: See Table 2.
Table 2. Switch Contact Ratings.
Relay Load Type
Control Amps Full Load (FLA)
Amps Locked Rotor (ALR)
Non-Inductive
Pilot Duty
a
Alarm
a
P7810C,D models only.
Sensor Material: 304 stainless steel.
Pressure Connector:
P7810A,B: 1/4 in. NPT.
P7810C,D: 1/2 in. NPT.
Case Material: Plastic.
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Home and Building Control Sales Office (check white pages of your phone directory).
2. Home and Building Control Customer Relations
Honeywell, 1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
65-0268—1
120 Vac
50 Hz 60 Hz
2.8
7.0
120 Vac
9.8A
58.8A
10.0A
1.0A
Electrical Terminations: Screw terminals.
Accuracy: ±4.0 percent full scale output operating range,
over operating temperature.
Environmental Ratings:
Operating Temperature Range: 32°F to 140°F (0°C to 60°C).
Storage Temperature Range: -20°F to +150°F (-29°C to
+66°C).
Humidity: 5% to 95% relative humidity, noncondensing.
Vibration: 0.5G continuous maximum vibration.
Dimensions: See Fig. 1.
Mounting Position: Upright, see Fig. 2.
Device Weight: 2.0 lb, 8 oz (1.15 kg).
Approvals:
Underwriters Laboratories Inc. Listed.
Canadian Standards Association Listed: Pending.
Factory Mutual Approved: Pending.
CSD-1 AFB (Control Safety Devices, Automatic Fired Boilers):
Acceptable.
FCC Class B, computing devices, part 15.
Accessories:
14026 Siphon Loop with 1/4 in. NPT threads.
205860 Minimum Position Potentiometer for Series 70
Motors.
209731A Siphon Loop with 1/2 in. NPT threads.
4074EWC Door Assembly with captive screw and adjusting
wrench (accessory for P7810A, B).
4074EWD Mounting Bracket with six screws.
4074EDC or EED Bag Assembly to interface 4 to 20 mA with
Series 90 Firing Rate Motor.
Replacement Parts:
4074EWC Door Assembly with captive screw and adjusting
wrench (replacement part for P7810C,D).
4074EVP Door Wrench.
Pressure Ratings: See Table 3.
2