Open the burner pods cap that has gas valve and electronic card on it by dismantling screws (see picture 3a).
•
Elektronik kart t gaz valfine sabitleyen vidayı, karta bağlı olan kablo soketini ve kart t n sol yanında takılı olan elektrod kablolarını sökerek, kart t
brülör kutusundan çıkart t nız. ( Bakınız: Resim 3b) Remove the card from burner by removing the electrode cables that are mounted at left side
of the card, cable socket connected to card and the srew that fixes electronic card to gas valve (see picture 3b)
•
Remove the turbulator (look at pic 2b, picture 3b)
•
Remove the square flange by removing 6 screws on gas connection point (see pic 3b)
•
Slide gas valve to the right together with the gas transfer components and get out of the burner cap crossingly from the injector point carefully.