Table of Contents
Advertisement
While using the radiant, it is always necessary to take following security precautions for reducing the electric shock, burning, injuring risks and
preventing radiant to be out of warranty.
•
Please read the informations in this manual before start using radiant.
•
ATTENTION: ELECTRIC SHOCK RISK. Do not try to open or epair the radiant by yourself.
•
Attention should be paid to minimum installation distances between radiant and flammable surfaces and materials stated in this guide.
•
Radiant can break down for any reason.Radiant can show errors caused from anything. Mekanik yada elektriksel ayarlama, tamir ve bakım
durumları için sadece MAKTEK YETKİLİ SERVİS' lerini arayınız. You can understand if user can fix or intervention of autorised service can fix the
problem, by reading data and directives in this guide. Only call MAKTEK AUTORISED SERVICES for mechanic or electrical adjustment, main and
repair issues.
•
Do not use the radiant in open places that rain come into contact.
•
Do not use radiant in people's accomodation places (like saloon, room).
•
Use only the specified gas type. Do not use gas types which are not suitable and didn't specified in this manual
•
Do not run the radiant near combustible vapor, liquid and gases against explosion and fire danger.
•
Leak check must be done with appropriate tools ( for example with soap bubble or pressure test) on every pipe and pipe connection points
of the gas line.
•
Do not move the heater while running or it is hot even it is off. Do not try to fix or touch it.
•
Close the fuse key to stop running of radiator.
•
Do not interfere in electricity connections of the radiant for any purpose
•
Use heater only in directions of this manual.Producer company can not be held responsible for situations which people benefit from or
radiant will be damaged.
•
Do not use the extension leads which can make burning risk and has an overheat risk.
•
Do not use the radiant if it falls or is damaged from any reason.
•
Radiant mus be shut down while making cleaning and maintenace and unplug.
•
In direction of this manual, some parts of the radiant can be cleaned with using soft rubber and washing agent (not solvent base).
•
It is good for your safety and heating comfort to check the radiant visually.
Radiant heater installation and service must be in accordance with valid standarts and instructions which will be announced in
future.Producer company can not be held responsible for the damages will be caused from wrong installation and miss-use.
ATTENTION; Only Autorised Services and Producer is responsible for the Radiant. Besides these do not allow anyone to fiddle with
adjustment of radiant.
WARNING: Natural gas is an actually odourless but it is aromatised with rotten garlic smell for noticing the gas leakage easily. When you notice a
similar smell or feel a gas leakage, firstly close the gas entrance valve and clear the air, then apply to autorised services and gas company which is
responsible for your region.
SAFETY WARNINGS
12
Advertisement
Table of Contents
