Demounting Of Burner - Maktek MR20 Installation, Usage And Maintenance Manual

ATTENTION! :
FIRE OR EXPLOSION RISK.
PART REPLACEMENT AND VE REPAIR METHOD
• DISMANTLING THE BURNER
For changing any part in burner box;
•
Remove the gas and electric connections,
•
Remove the setscrews which are in point of burner and radiant pipes junction, as shown in picture 1a.
•
Finally dismantle the burner from radiant pipes, place in a workable safe place like ground or table.
Disconnect the gas and electricty connection before starting any repairing or service operation!
18