Nortel BayStack 350 Series Manual page 68

Using the BayStack 350 Series 10/100 Autosense Switch
The Server Trunk Configuration screen opens
Note: The screen items shown in boldface type represent example
configuration settings you could enter to obtain the topology configuration
shown in
Trunk
----- ----------------------------
S1 [ 6
S2 [
S3 [
S4 [
Valid server trunk configurations are:
1 or 2 trunks of up to 4 links each
Up to 4 trunks of 2 links each
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 1-19. Server Trunk Configuration screen for Switch SW1
The Server Trunk Configuration screen for switch SW1 is configured as follows:
• Trunk (read only) indicates the server trunks (S1 through S4) that correspond
to the switch ports specified in the Trunk Members fields.
• Trunk Members indicates the ports that can be configured, in each row, to
create the corresponding trunk:
Ports 6, 7, 9 and 17 are assigned as trunk members of trunk S1.
• Trunk Status indicates the Trunk Status for each of the trunks. When set to
Enabled, the configuration settings for that specific trunk are activated.
1-30
Figure 1-17.
Server Trunk Configuration
Trunk Members
][ 7 ][ 9 ][ 17
][ ][ ][
][ ]
][ ]
(Figure
Trunk Status
------------
] [ Enabled
] [ Disabled ]
[ Disabled ]
[ Disabled ]
Press Ctrl-C to return to Main Menu.
1-19).
]
893-00992-E