Step 3: Tv Hookups - Sony DVP-NS305 Operating Instructions Manual

Step 3: TV Hookups

Connect the supplied audio/video cord and power cord (mains lead) in the order (1~3)
shown below. Be sure to connect the power cord (mains lead) last.
to LINE OUT
L/R (AUDIO)
DIGITAL OUT
COAXIAL
l: Signal flow
When connecting to a standard 4:3
screen TV
Depending on the disc, the image may not fit
your TV screen.
If you want to change the aspect ratio, please
refer to page 60.
When connecting to a monaural TV
Use a stereo-mono conversion cord (not
supplied). Connect the LINE OUT (VIDEO)
jack on the player to the TV's video input
jack, and connect the LINE OUT L/R
(AUDIO) jacks to the TV's audio input jack.
To change the colour system
The colour system of the player is set to
NTSC or PAL. If the on-screen display of
the player does not appear on the TV, change
the colour system of the player (PAL or
NTSC) so that a picture appears on your TV.
To change the colour system, hold [/1 down
16
1 Audio/video cord
(supplied)
to LINE OUT
(VIDEO)
LINE OUT
R-AUDIO-L VIDEO
LINE OUT COMPONENT
Y
VIDEO OUT
PCM/DTS/MPEG/
S VIDEO
DOLBY DIGITAL
OUT
C B
OPTICAL
R-AUDIO-L VIDEO
C R
to video input
to audio input
TV
CD/DVD Player
while pressing X on the player. The power
indicator lights up in green and changes to
red. Then release X.
INPUT
(yellow)
VIDEO
(white)
L
AUDIO
(red)
R
2 Power source
3 Power source